services
HSHA Rate Gyro
- Steering/Orientation in Vertical Holes
Our HSHA
Rate Gyro is extremely useful when drilling
vertical directional holes taking all the
guess work out of this type of drilling.
by utlising 'Gyro tool face' it is now possible
to orientate a motor or wedge in the vertical
plane.
A mule shoe assembly is fitted to the end
of the HSHA Rate Gyro and orientated
to Gyro tool face on the surface to establish
a zero reference direction.
The assembly is then lowered into the hole
providing real-time directional data as
the tool traverses the hole. Once the tool
has seated, the 'Gyro tool face' is displayed
indicating the orientation of the motor
or wedge. The Gyro is then pulled from the
hole and drilling continues. Checks can
very simply and quickly be made as the hole
progresses to ensure the navi motor is heading
in the desired direction.
The rods can be rotated to precision while
the actual orientation of the motor or wedge
are displayed on screen.
The Gyro is then pulled from the hole and
drilling continues. Checks can very simply
and quickly be made as the hole progresses
to ensure the navi motor is heading in the
desired direction |
 |
VERTICAL
HOLES...OR ARE THEY? |
 |
| |
|
|
 |
|
 |
|
